"Sıcaklık Kalibratörü" AOIP CALYS 80 IS Multifonksiyonel Proses Kalibratörü-Sıcaklık Kalibratörü(ATEX)

Özellikler

Specifications and performances in temperature @23°C ±5°C

Uncertainty is given in % of reading (CALYS 80 IS display) + fixed value.

Resistive probes: Measurement and simulation

Sensor	Range (Input and Output)	Resolution	Accuracy / 1 year
Pt100 (α = 3850)	-200°C to +850°C	0.01°C	0.01% RDG + 0.05°C
Pt100 (α = 3926)	-200°C to +850°C	0.01°C	0.01% RDG + 0.05°C
Pt100 (α = 3902)	-200°C to +650°C	0.01°C	0.01% RDG + 0.05°C
Pt100 (α = JIS SAMA)	-200°C to +600°C	0.01°C	0.01% RDG + 0.05°C
Pt200 (α = 3851)	-200°C to +850°C	0.1°C	0.01% RDG + 0.15°C
Pt500 (α = 3851)	-200°C to +850°C	0.1°C	0.01% RDG + 0.1°C
Pt1000 (α = 3851)	-200°C to +850°C	0.01°C	0.01% RDG + 0.1°C
Cu10 (α = 427)	-70°C to +150°C	0.1°C	0.01% RDG + 0.4°C
Cu100 (α = 428)	-180°C to +150°C	0.1°C	0.01% RDG + 0.05°C
Ni100 (α = 618)	-60°C to +180°C	0.1°C	0.01% RDG + 0.05°C
Ni120 (α = 672)	0°C to +150°C	0.1°C	0.01% RDG + 0.05°C

Connections: 2, 3 and 4 wires
Rtd simulation excitation current: from 0.1 to 4 mA without incremental error
Rtd measurement excitation current: 0.2 mA
Rtd cable compensation: up to 100 m (for each wire)
Rtd cable compensation error (Pt100): ± 0.005°C/ of total wire
Maximum load resistance: 600 Ω @ 20 mA

Thermocouples: Measurement and simulation

Type	Range	Résolution	Accuracy / 1 an
J	-210 to +1200°C	0.01°C	0.01% RDG + 0.1°C
K	-270 to +1370°C	0.01°C	0.01% RDG + 0.1°C
T	-270 to +400°C	0.01°C	0.01% RDG + 0.1°C
R	-50 to 1760°C	0.1°C	0.01% RDG + 0.2°C
S	-50 to 1760°C	0.1°C	0.01% RDG + 0.2°C
B	+50 à +1820°C	0.1°C	0.01% RDG + 0.3°C
C	0 to 2300°C	0.1°C	0.01% RDG + 0.2°C
G	0 to 2300°C	0.1°C	0.01% RDG + 0.3°C
D	0 to 2300°C	0.1°C	0.01% RDG + 0.3°C
U	-200 to +400°C	0.01°C	0.01% RDG + 0.1°C
L	-200 to +760°C	0.01°C	0.01% RDG + 0.1°C
N	-270 to +1300°C	0.01°C	0.01% RDG + 0.1°C
E	-270 to +1300°C	0.1°C	0.01% RDG + 0.1°C
F	0 to +1400°C	0.1°C	0.01% RDG + 0.1°C

Display units: °C, °F et K
Resolution: 0.01°C / 0.01°F
Temperature scale: ITS90 and IPTS68
Reference junction compensation: internal automatic from -10°C to +55°C or external
Rj compensation drift: ± 0.002°C/°C (from -10 °C to +45 °C) - Class A Pt100
Input impedance: > 10 MΩ

Specifications and performances in pressure @23°C ±5°C

Pressure

Pressure media: AISI 316 SS compatible fluids (water, gas, and oil)
Temperature compensation: Automatic with built-in calibration matrix
Engineering units: mbar, bar, hPa, kPa, Mpa, kg/cm2, kg/m2, psi, mmH2O, cmH2O, mH2O, Torr, atm, lb/ft2, inH2O, FTH2O, mmHg, cmHg, mHg, inHg
Accuracy: accuracies given for 1 year, include non linearity, hysteresis, and repeatability.
Temperature coefficient inside the temperature compensated range: ± 0.002% RDG /°C
Compensation range: 0°C to 45°C

Measurement by internal pressure module

Reference	Range	Resolution
IPM000100G	-100 / 100 mbar Gauge	0.001 mbar
IPM000500G	-500 / 500 mbar Gauge	0.01 mbar
IPM002000G	-0.95 / 2 bar Gauge	0.01 mbar
IPM007000G	-0.95 / 7 bar Gauge	0.1 mbar
IPM020000G	-0.95 / 20 bar Gauge	0.1 mbar
IPM002000A	2 bar Absolute	0.01 mbar
IPM020000A	20 bar Absolute	0.1 mbar

Accuracy: ± 0.025% F.S.
Overpressure: 125% F.S.
Port: female, 1/8" BSP

Measurement by external pressure module

Reference	Range	Resolution
EPM000100G	-100 / 100 mbar Gauge	0.001 mbar
EPM000500G	-500 / 500 mbar Gauge	0.01 mbar
EPM001000G	-0.95 / 1 bar Gauge	0.01 mbar
EPM002000G	-0.95 / 2 bar Gauge	0.01 mbar
EPM007000G	-0.95 / 7 bar Gauge	0.1 mbar
EPM200000G	-0.95 / 20 bar Gauge	0.1 mbar
EPM035000G	0.95 / 35 bar Gauge	1 mbar
EPM070000G	0 / 70 bar Gauge	1 mbar
EPM150000G	0 / 150 bar Gauge	1 mbar
EPM350000G	0 / 350 bar Gauge	10 mbar
EPM700000G	0 / 700 bar Gauge	1 mbar
EPM002000A	2 bar Absolute	0.01 mbar
EPM020000A	20 bar Absolute	0.1 mbar

Accuracy: ± 0.025% F.S.
Overpressure: 125% F.S.
Port: male, 1/4" BSP
Connection wire length: 2 m

Specifications and performances in process @23°C ±5°C

DC voltage: Measurement and simulation

Range	Resolution	Accuracy / 1 an
-20 mV to +200 mV	1 µV	0.01% RDG + 3 µV
-0,2 V to +2 V	10 µV	0.01% RDG + 10 µV
-2 V to +12 V	100 µV	0.01% RDG + 100 µV

Input impedance:
< 10 MΩ for ranges up to 2 V
> 500 kΩ for ranges up to 20 V
Output impedance (emf output): < 0.5 Ω with a maximum current of 0.5 mA
Output noise (at 300 Hz):
< 2 μV pp for ranges up to 200 mV
< 10 μV pp for ranges up to 2 V
< 80 μV pp for ranges up to 20 V

DC current: Measurement and simulation

With or without loop supply

Range	Resolution	Accuracy / 1 an
0 mA to 21 mA	0.1 µA	0.01% RDG + 0.4 µA
-5 mA to 50 mA	0.1 µA	0.01% RDG + 0.4 µA

Input impedance: < 20 Ω at 1 mA
Maximum load resistance: 600 Ω at 21 mA
Loop supply: 12 V ± 5%

Resistance: Measurement and simulation

Type	Range	Resolution	Accuracy / 1 an
Measurement	0 to 500 Ω	10 mΩ	0.01% RDG + 12 mΩ
Measurement	0 to 5000 Ω	100 mΩ	0.01% RDG + 120 mΩ
Simulation	0 to 500 Ω	10 mΩ	0.01% RDG + 40 mΩ
Simulation	0 to 5000 Ω	100 mΩ	0.01% RDG + 320 mΩ

Connections: 2, 3 and 4 wires
Source resistance effects: ± 1 μV error for 1000 Ω source resistance
Simulation excitation current: from 0.1 to 4 mA without incremental error
Measurement excitation current: 0.2 mA
Maximum load resistance: 600 Ω @ 20 mA

Frequency, pulse: Measurement and simulation

Type	Range	Resolution	Accuracy / 1an
Frequency	1 to 200 Hz	0.001 Hz	0.005% RDG + 0.001 Hz
	1 to 2 kHz	0.01 Hz	0.005% RDG + 0.01 Hz
	1 to 20 kHz	0.1 Hz	0.005% RDG + 0.1 Hz
Pulse	0 to 106	1 pulse	0.01% RDG

Input impedance: > 500 kΩ

Further features

Scaling in measurement and simulation modes	Setup of zero and span programmable within -399999 and +999999 Scaling allows process signals to be displayed in % of FS or in all other units. This function also allows sensors to be corrected after a calibration.
Square root	In combination with scaling function
Statistical functions	hold, max, min, offset, zero, average
Transmitters tests	The feature enables any pressure or temperature transmitter to be controlled and calibrated with simultaneous display of input and output values in % F.S. or in actual unit. The measuring circuit is also able to power the loop for a direct connection to the transmitter under test.
Ramps generation	Autoramp and Autostep capability with Start, End, and Step programmable parameters Single and continuous cycle with Start, End, Rises, Soaks, and Falls programmable parameters The signal value setting uses a unique in-line single-digit setting mode or a direct numeric entry Direct keypad access to n.10 programmable memory stored values
Transmitter function	CALYS IS can be used as a transmitter. Any input signal (electric or pressure) can be converted into a 4-20 mA output. The galvanic insulation between the input and output channels allows this function o be used on the prcess directly.
Switch test	Temperature, signal and pressure switches can be tested using this advanced procedure. The calibrator will hold the display reading when the contact changes status.

General specifications

Size	290 x 98 x 57 mm
Weight	1.4 kg
Display	240 x 320 pixel liquid crystal graphical display with backlite and contrast control Display of result as table of values or trend curve
Power supply	230 V ± 10 %, 50/60 Hz
Battery	Type: NiMh Charging time: 8 h, 6 h if instrument switched off Life time: 8 h (Tc and V),3 h at 20 mA
Communication ports	RS 232
Storage capacity	10 data with manual or automatic recall

Environmental specifications

Reference range	23°C ± 5°C (RH: 45 to 75 % condensing)
Operating reference range	-10 to 55°C (RH: 95 % non condensing)
Storage temperature limits	0°C to +60°C (without battery)
Maximum height	0 to 2000 m
IP protection	IP54 according to EN60529

Safety specifications

Protections	Thermal fuse High voltage suppressor Resistor-diode voltage limiter
Class	class II 1G Ex ia IIC T4 (-20°C from T Ambient to +50°C)

"SıCAKLıK KALIBRATöRü" AOIP CALYS 80 IS MULTIFONKSIYONEL PROSES KALIBRATöRü-SıCAKLıK KALIBRATöRü(ATEX) | KRAFT TEKNIK ÖLçüM CIHAZLARı